Skip to content
Armor Hive
  • Home
  • Products
  • About us
  • Contact
  • $0.00 0
  • Toggle website search
$0.00 0 Menu Close
  • Home
  • Products
  • About us
  • Contact
  • $0.00 0
  • Toggle website search

Safety Gloves Knowledge Hub

  1. Home>
  2. Safety Gloves Knowledge Hub
EN 16350 Electrostatic Gloves Explained: Resistance, Grounding and the 10⁸-Ohm Limit

EN 16350 Electrostatic Gloves Explained: Resistance, Grounding and the 10⁸-Ohm Limit

EN 16350 tests whether charge can pass through a glove. Learn the 10⁸-ohm limit, dry test conditions and how the...
Read more →
Polyester vs Nylon Work Glove Liners: What Changes Beneath the Coating?

Polyester vs Nylon Work Glove Liners: What Changes Beneath the Coating?

The coating touches the work, but the knitted liner controls much of the fit, moisture feel and movement. See what...
Read more →

Latex-Coated vs Nitrile-Coated Work Gloves: Which Palm Coating Fits the Task?

A quick clarification: this article is not about the thin disposable nitrile gloves used in food service or healthcare. It...
Read more →
Why Disposable Nitrile Gloves Have Pinholes—and How Water-Leak Testing Finds Them

Why Disposable Nitrile Gloves Have Pinholes—and How Water-Leak Testing Finds Them

A glove can look perfect and still contain a hole too small to see. These defects are called pinholes or...
Read more →
Medical-Grade vs Industrial Nitrile Gloves: What the Standards Actually Prove

Medical-Grade vs Industrial Nitrile Gloves: What the Standards Actually Prove

Two blue nitrile gloves can come from similar dipping lines, have the same thickness and even feel identical. One may...
Read more →
Are Nitrile Gloves Food Safe? Food-Contact Compliance Explained

Are Nitrile Gloves Food Safe? Food-Contact Compliance Explained

Nitrile is widely used for food preparation, but the material name alone does not make every nitrile glove suitable for...
Read more →
Nitrile Glove Modulus Explained: Why Two Gloves of the Same Thickness Feel Different

Nitrile Glove Modulus Explained: Why Two Gloves of the Same Thickness Feel Different

Two nitrile gloves can both measure 4 mil at the palm and still feel like different products. One stretches over...
Read more →
Why Disposable Gloves Have Beaded Cuffs: The Engineering Behind the Rolled Edge

Why Disposable Gloves Have Beaded Cuffs: The Engineering Behind the Rolled Edge

The narrow rolled ring at the opening of a disposable glove looks decorative, but it is a deliberate structural feature....
Read more →
How Nitrile Gloves Are Made: From NBR Latex to a Finished Glove

How Nitrile Gloves Are Made: From NBR Latex to a Finished Glove

A disposable nitrile glove begins as a water-based dispersion that looks more like milk than rubber. It becomes a thin,...
Read more →
How to Read ISO 374-5:2024 Microorganism and Virus Glove Markings

How to Read ISO 374-5:2024 Microorganism and Virus Glove Markings

A biohazard pictogram on a glove package can look like a broad promise. Under ISO 374-5:2024, however, the marking communicates...
Read more →
Why Nitrile Gloves Can Cause Type IV Contact Dermatitis: Rubber Accelerators Explained

Why Nitrile Gloves Can Cause Type IV Contact Dermatitis: Rubber Accelerators Explained

“Latex-free” answers one important question: the glove is not made from natural rubber latex and therefore does not expose the...
Read more →
ASTM D6978 Chemotherapy Glove Testing: How to Read Breakthrough-Time Data

ASTM D6978 Chemotherapy Glove Testing: How to Read Breakthrough-Time Data

The label “nitrile” does not tell you how long a glove will resist a chemotherapy drug. Two nitrile gloves can...
Read more →
ASTM F1671 Viral Penetration Test for Protective Gloves: What a Pass Really Means

ASTM F1671 Viral Penetration Test for Protective Gloves: What a Pass Really Means

A glove can look intact and still contain a path too small to see. ASTM F1671 addresses that problem by...
Read more →
Nitrile Glove Tensile Strength and Elongation: ASTM D6319 Explained

Nitrile Glove Tensile Strength and Elongation: ASTM D6319 Explained

Two nitrile gloves can have the same thickness and still behave differently when stretched. The reason is simple: thickness tells...
Read more →
What Does AQL Mean for Disposable Gloves? Pinhole Testing and Lot Acceptance Explained

What Does AQL Mean for Disposable Gloves? Pinhole Testing and Lot Acceptance Explained

A box marked AQL 1.5 is often interpreted as “no more than 1.5% of the gloves have holes.” That is...
Read more →
Powder-Free Nitrile Gloves: Chlorination vs Polymer Coating Explained

Powder-Free Nitrile Gloves: Chlorination vs Polymer Coating Explained

Fresh nitrile rubber is naturally tacky. That helps a glove grip, but it also creates a manufacturing problem: the glove...
Read more →
How Touchscreen Work Gloves Actually Work: Conductive Paths, Coatings and Failure Modes

How Touchscreen Work Gloves Actually Work: Conductive Paths, Coatings and Failure Modes

A worker taps a tablet while wearing a glove and the screen responds. That can look like a simple feature,...
Read more →
Why Work Gloves Reinforce the Thumb Crotch: Stress, Wear and Dexterity

Why Work Gloves Reinforce the Thumb Crotch: Stress, Wear and Dexterity

Many work gloves wear through first in the curved web between the thumb and index finger. That area—often called the...
Read more →
How Cut-Resistant Glove Yarns Work: Fiber, Weight and Knit Construction

How Cut-Resistant Glove Yarns Work: Fiber, Weight and Knit Construction

“Made with HPPE” or “aramid liner” sounds like a protection level, but it is only a material description. Cut resistance...
Read more →
Why Glove Coatings Delaminate: What Makes the Palm Layer Peel Away

Why Glove Coatings Delaminate: What Makes the Palm Layer Peel Away

When the black or coloured palm layer lifts from a knitted glove, it is easy to describe the failure as...
Read more →
Why Work Gloves Feel Sweaty: Wicking, Breathability and Coating Coverage Explained

Why Work Gloves Feel Sweaty: Wicking, Breathability and Coating Coverage Explained

Sweat inside a work glove is often blamed on the liner. In reality, moisture comfort is a system: the hand...
Read more →
Why Coated Work Gloves Harden and Crack: Aging, Storage and Chemical Attack

Why Coated Work Gloves Harden and Crack: Aging, Storage and Chemical Attack

A coated glove can look unused and still feel stiff when it comes out of storage. Another glove may become...
Read more →
Single-Dip vs Double-Dip Work Gloves: What the Second Coating Actually Changes

Single-Dip vs Double-Dip Work Gloves: What the Second Coating Actually Changes

Two gloves can both be described as “nitrile coated” yet behave very differently around oil, wet parts and repeated abrasion....
Read more →
PU vs Nitrile-Coated Work Gloves: What Changes at the Palm?

PU vs Nitrile-Coated Work Gloves: What Changes at the Palm?

Compare PU and nitrile glove coatings by dry tactility, oil contact, coating build and verified test performance.
Read more →
Palm-Dipped vs Three-Quarter-Dipped vs Fully Dipped Work Gloves

Palm-Dipped vs Three-Quarter-Dipped vs Fully Dipped Work Gloves

See where palm, three-quarter and full-dip coatings stop—and how coverage changes liquid contact, breathability and dexterity.
Read more →
Smooth vs Foam vs Sandy Nitrile-Coated Gloves: What Changes the Grip?

Smooth vs Foam vs Sandy Nitrile-Coated Gloves: What Changes the Grip?

See how smooth, foam and sandy nitrile coatings manage dry contact, thin fluid films and oil—and why coating names alone...
Read more →
EN 511:2006 Glove Ratings Explained: Convective Cold, Contact Cold and Water

EN 511:2006 Glove Ratings Explained: Convective Cold, Contact Cold and Water

Learn how EN 511 separates convective cold, contact cold and water penetration—and what codes such as 231 actually mean.
Read more →
EN 407:2020 Glove Ratings Explained: What the Six Heat-Protection Numbers Mean

EN 407:2020 Glove Ratings Explained: What the Six Heat-Protection Numbers Mean

Learn how to read all six EN 407:2020 heat-glove ratings—including contact temperatures, flame spread and molten-metal tests.
Read more →
What Does Glove Gauge Mean? 10, 13, 15 and 18 Gauge Work Gloves Explained

What Does Glove Gauge Mean? 10, 13, 15 and 18 Gauge Work Gloves Explained

Learn how 10, 13, 15 and 18 gauge glove liners differ—and why gauge alone cannot predict thickness, dexterity or cut...
Read more →
How to Read EN ISO 21420 Glove Markings: Sizing, Dexterity and Limits

How to Read EN ISO 21420 Glove Markings: Sizing, Dexterity and Limits

Learn what EN ISO 21420 covers, how glove sizing and dexterity levels work, and why the standard is never a...
Read more →
How to Read ISO 374-1:2024 Chemical-Resistant Glove Markings

How to Read ISO 374-1:2024 Chemical-Resistant Glove Markings

Learn how to read ISO 374-1 chemical-glove markings, including Types A, B and C, test-chemical letters and permeation levels.
Read more →
Puncture Resistance vs Needlestick Resistance: Why Glove Ratings Use Different Tests

Puncture Resistance vs Needlestick Resistance: Why Glove Ratings Use Different Tests

Learn why ordinary puncture and hypodermic-needle resistance use different tests, probes and rating scales—and how to read each result correctly.
Read more →
Oil Resistance vs Oily Grip: Why a Glove Can Resist Oil but Still Feel Slippery

Oil Resistance vs Oily Grip: Why a Glove Can Resist Oil but Still Feel Slippery

Learn why a glove can resist oil yet still slip—and how coating chemistry, surface texture and the oil film affect...
Read more →
How Chemical Resistance of Nitrile Gloves Really Works

How Chemical Resistance of Nitrile Gloves Really Works

Learn why an intact nitrile glove can still allow chemicals through—and how breakthrough time, permeation rate and degradation should be...
Read more →
Latest ANSI/ISEA 105 Glove Markings Explained: Understanding the 2024 Standard

Latest ANSI/ISEA 105 Glove Markings Explained: Understanding the 2024 Standard

Learn how to read the ANSI/ISEA 105-2024 pentagon, including cut, abrasion and puncture ratings, test thresholds, X markings, and what...
Read more →
Why Do Nitrile Gloves Tear Easily? The Mechanics Behind the Damage

Why Do Nitrile Gloves Tear Easily? The Mechanics Behind the Damage

A nitrile glove can stretch considerably and still tear from a tiny nick. Learn how stress concentration, crack growth, glove...
Read more →
How Thick Should Nitrile Gloves Be? 4, 6 and 8 Mil Compared

How Thick Should Nitrile Gloves Be? 4, 6 and 8 Mil Compared

Understand what 4, 6 and 8 mil measure and how 8 mil thickness, RDT grip geometry and product evidence work...
Read more →
How to Read EN 388 Glove Ratings Without Misreading the Code

How to Read EN 388 Glove Ratings Without Misreading the Code

Learn how to read all six positions in an EN 388 glove marking, including X, the A–F cut scale, and...
Read more →
ANSI/ISEA 138 Impact-Resistant Gloves: Levels 1, 2 and 3 Explained

ANSI/ISEA 138 Impact-Resistant Gloves: Levels 1, 2 and 3 Explained

An impact-resistant glove is easy to recognize. Flexible guards cover the knuckles and fingers, often giving the back of the...
Read more →
What Are TPE Gloves? Material, Manufacturing, and Best Uses

What Are TPE Gloves? Material, Manufacturing, and Best Uses

Most people recognize PE, vinyl, latex, and nitrile gloves. TPE is less familiar, even though it occupies a useful position...
Read more →
Nitrile vs Latex vs PU Gloves: Which Material is Best for Your Business?

Nitrile vs Latex vs PU Gloves: Which Material is Best for Your Business?

Work gloves are essential in industrial safety across manufacturing, logistics, assembly, and maintenance operations. Different glove materials offer distinct levels...
Read more →
Understanding Work Glove Safety Standards: ANSI Cut Levels Explained

Understanding Work Glove Safety Standards: ANSI Cut Levels Explained

Work gloves are critical for workplace safety across construction, manufacturing, logistics, and chemical processing. With varying hazards like cuts, heat,...
Read more →
Work Glove Selection Guide – How to Choose the Right Gloves

Work Glove Selection Guide – How to Choose the Right Gloves

Selecting the right work gloves is based on matching workplace hazards with the appropriate level of protection, material, and performance. According...
Read more →
  • Armor hive
  • Armor hive
  • Armor hive
Envelope
en_USEnglish
en_USEnglish
Request a Quote

×
×

Cart

Scan the code
ArmorHive Support
Hello 👋, welcome to Armor Hive
Can we help you?
Start WhatsApp Chat
Powered by Joinchat